ASTM B914-2019 pdf free download

ASTM B914-2019 pdf free download.Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
1. Scope
1.1 This standard is published with the following objectives: 1.1.1 To establish standard color codes for zinc, zinc alloy and zinc master alloy ingot used by the Hot-Dip Galvanizing industry, and 1.1.2 To standardize the use and application of these color codes. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability ofregulatory limitations prior to use. 1.3 This international standard was developed in accor- dance with internationally recognized principles on standard- ization established in the Decision on Principles for the Development of International Standards, Guides and Recom- mendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
4. Significance and Use
4.1 The purpose of these color codes is to allow for quick identification of ingot bundles or jumbo ingots of alloys used for hot-dip galvanizing. Other than jumbo ingots, this standard is not intended to imply that each ingot will be color-coded but only that each ingot bundle be color coded. 4.2 Each ingot bundle or jumbo ingot shall be identified with the appropriate color code listed in Table 1. 4.3 The color will be applied as a stripe, or stripes, on two adjacent sides of the ingot bundle or jumbo ingot. The color stripes will be applied to include the ingot bundle foot. 4.4 When using multiple stripes, the colored stripes will be applied from left to right as indicated in Table 1. 4.5 In the absence of a written agreement to the contrary between the supplier and end user, the North American color code will be the standard for all North American transactions; for all other transactions the International Color Code will be used.
5. Keywords
5.1 Alloy A-1; Alloy A-2; Alloy A-3; Alloy A-4; Alloy A-5; Alloy A-6; Alloy S-1; aluminum-zinc alloys; color; color code; GALFAN; GALVALUME; galvanizing; hot-dip; non-ferrous metals; Type 5; Type 10; Type 15; zinc; zinc alloys; zinc- aluminum alloys; Zn/Al